Oil Immersed Hydraulic Power Pack for Home Lift and Lift Platform

• Certification: GS, CE, ISO9001
• Pressure: Low Pressure
• Work Temperature: Normal Temperature
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: EM5896
• Voltage: 380V
• Installation: Vertical
• Material: Carbon Steel
• Power: 1.5kw,2.2kw,3.75kw,5.5kw,11kw
• Voltoge: 3pH 220V,380V,400V
• Workpressure: 6MPa,8MPa,10MPa
• Oil Tank: 35L,55L,80L,120L
• Transport Package: Woodenbox
• Specification: 220V/380V
• Trademark: Eonamch
• Origin: Shandong China
• HS Code: 8412299090
• Production Capacity: 20000picece/Year
• Package Size: 75.00cm * 40.00cm * 75.00cm
• Package Gross Weight: 68.000kg

Product Description

Oil Immersed Low noise hydraulic power pack for home lift, lift platform and elevator


This oil immersion power unit has low noise, consisting of high pressure vane pump, motor, multi-functional manifold, valves, tank, ect.start the motor to lift the machine and the lowering movement is activated by the solenoid valve with the speed controlled by the adjustable throttle valve. It can achieve single or double speed decline. When the lift rises to a high position, but the power supply is cut, the lowering movement is controlled by the manual override function.

Oil-immersed double-speed with buffer.

Descending effect adjustment step:

1. Tighten the two black fine threads shown the figure below, and do not use force after they are screwed in place.
2. Screw the two hand wheels to screw out the coarse thread for four to five circles.
3. Remove one of the coils and raise the elevator.
4. After pressing the lowering button of the lifter, slowly adjust the fine thread on one side of the coil outward until the lifter starts to lower. The lift can descend smoothly, regardless of the speed of the lift. 5. Remove the first coil.Install the other coil. Repeat the fourth part.

6.After the two coils are adjusted respectively, reinstall all the coils. Lift once and observe the lifting effect and speed. At this time, the sequence of energizing and de-energizing of the main coil shall be especially required. When descending, the slow valve shall be energized first, and then the fast valve shall be de-energized. The energization interval shall be 1.5-2.5 seconds. After descending in place, the fast valve is powered off first, the slow valve is powered off later, and the deceleration travel distance is 20-30 cm.
7.Adjust the descending speed of the two hand wheels, and the fast valve controls the normal descending speed.
8. After pressing the emergency stop button, if the buffer distance is too large, rotate the hand wheel of the quick valve clockwise, and adjust it to the appropriate distance without affecting the descending speed. Just adjust the handwheel for the speed of the descent!

 

It keeps the home lift up and down smoothly and noise lower than 50 decibels.